Last modification: 18-Feb-2008

The marmuXTM system


Complete turn-key system for X-ray crystallography


  Chapters:    Overview   |   Performance   |   Specifications   |   Downloads

1. Overview


Please, click the small images for a full scale image.
marmuX
Source, table and mar345dtb
Tower
Source tower
Optics
Interface optics/dtb

Generator controller
The marmuX is a complete turn-key system for X-ray crystallography of single crystals. It consists of

The marmuX is modular built and can easily be expanded to include the mardtb easymount or the marcsc sample changer.

2. Performance

In experiments that we have carried out very carefully, we could show that the marmuX system can produce data comparable to traditional high-power rotating anode systems. In a test using lysozyme crystals it was possible to collect data of good enough quality for sulfur-SAD-phasing using only 90 degrees of data. The experiments are describer in detailed in the application note mar.AN260107 from Jan 26, 2007

In a second application note mar.AN070207 from Feb 07, 2007, a direct comparison between the marmuX system and a rotating anode generator using the same experimental conditions (same crystals, exposure times, detector, etc.) revealed that small crystals produce superior data with the marmuX system while the results for larger crystals are virtually identical.

3. Specifications

X-ray source: GeniX micro-beam 50 kV/1 mA
Optics: Xenocs multi-layer optic
  Beam size at sample 210 x 210 microns
  Beam divergence < 5 mrad
  Anode coupling built-in water/air refrigerated chiller
  Mirror protection diaphragm vacuum pump with interlock to shutter
Detector: mar345 image plate
  Plate diameter 345 mm
  Pixel size 100 or 150 micron (software selectable)
  Cycle times 36-108 sec (depending on diameter and pixelsize)
  Dynamic range 17 bits (1-131000)
  Sensitivity 1.5 X-ray photons equivalent
Goniometer mardtb 2-axis multi-purpose goniometer
with automatic X-ray bea alignment and continuous
monitoring of the primary beam intensity
Optional accessories for mardtb - built-in motorized goniometer head
- easymountTM automatic mounting system
- marcscTM (cryogenic sample changer)
Cryo-cooler: Oxford Cryostream 700
  Liquid nitrogen auto-refill system Capacitance based level control
Experimental table: - 1700 x 1000 x 800 mm (w:d:h), stainless steel
- magnetic table top and aluminum table frame
Options: Radiation enclosure with sliding doors
and shutter interlock system



4. Downloads

Please, download the marmuXTM product brochure for a summary of the product properties and specifications as well as product application notes that demonstrate the capabilities of the system.

Description Size (MB) Action
Product brochure 1.4
Sulfur-SAD-phasing of hen egg lysozyme with Cu-radiation obtained in-house with a GeniX micro-beam generator 2.6
Comparison of a conventional rotating anode generator with a Xenocs GeniX micro-beam generator 1.3


Ask for a quotation!


© 2007 by Marresearch GmbH