Support → Howto's
Marresearch GmbH
Hans-Böckler-Ring 17
D-22851 Norderstedt / Germany
Tel. +49 (40) 529 884 0
Hans-Böckler-Ring 17
D-22851 Norderstedt / Germany
Tel. +49 (40) 529 884 0
Hardware Howto's
In this area, you will find manuals and instructions for solving specific hardware problems with the Marresearch detectors and goniostats. Service manuals are available for download by anonymous ftp from:
WARNING:
The procedures described in the manuals may require certain technical skills. We cannot guarantee for the completeness and correctness of all instructions and therefore Marresearch cannot be made liable to damages resulting from misunderstandings, misuse and wrongdoings by the customer. In any case, we do not recommend to use the manuals before consulting a Marresearch engineer or technician.
| Software related | |
|---|---|
| mar345dtb software distribution | |
| Howto use the spy port | |
| Howto reassign buttons on remote control unit | |
| Adjustments | |
| Howto adjust the beamstop | |
| Howto adjust the camera view | |
| Howto adjust the camera view and phi axis | |
| Howto focus the camera | |
| Repairs | |
| Howto remove the distance translation cover | |
| Howto remove the phi axis | |
| Howto replace the controller | |
| Howto replace the LCD monitor cable | |
| Howto replace the power supply unit | |
| Howto replace the shutter | |
| Howto fix the shutter | |
| Howto replace the cryo fan | |
| Sample changer related | |
| Howto update the sample changer | |
| Howto adjust the barcode reader | |
| Howto refill the sample changer | |
| Power supplies | |
|---|---|
| Howto adjust the high voltage | |
| Howto check the power supplies | |
| Howto replace HV power supply 1 | |
| Howto replace HV power supply 2 | |
| Howto replace HV power supply 3 | |
| What are the power supply status LEDs? | |
| Where is the HV power supply? | |
| Rotation encoder and servo | |
| Howto fix the rotation encoder | |
| Howto add the add-on PCB | |
| Howto check the servo controller | |
| Lock mechanism | |
| Howto check the lock mechanism | |
| Howto fix "Cannot unlock plate" | |
| Howto fix lock problems | |
| Howto replace the lock mechanism | |
| Reading head | |
| Howto grease the reading head spindle | |
| Howto change reading head parameters | |
| Howto check the lower end switch | |
| Howto fix the gap error | |
| Covers et al. | |
| Howto remove the covers | |
| Howto remove the rear cover | |
| Howto remove front and rear covers | |
| Howto remove the center cover | |
| Howto remove the detector from base | |
| Howto replace the controller | |
| Erase lamps | |
| Howto ignore erase lamp errors | |
| Howto replace erase lamps and sensors | |
| Howto replace the top erase lamp | |
| Howto replace the top erase lamp sensor | |
| Howto replace fans | |
| Howto replace filter mats | |
| Laser and photo-multiplier | |
| Where is the laser power supply? | |
| What is laser overcurrent ? | |
| Where is the signal cable ? | |
| Howto replace the signal cable | |